YOUR ONLINE AUDIO SUPERSTORE
Click to call! 866-693-7693

ART CleanBox II Hum Eliminator

Shipping:
Free Ground Shipping
SKU:ArCLEANBOXIIMFR #:CLEANBOXII
Product Highlights
  • Cost-effective in-line hum eliminator
  • Removes ground loops w/out signal degradation
  • Safe, passive operation
  • 1/4" TRS input and output connectors
  • Connectors read balanced & unbalanced lines
  • For use with guitar amps, keyboards and signal processors producing 60Hz ground loop noise

(0.00) View Ratings
Your Price:
$55.00
Questions? Ask our experts:
866-693-7693 866-693-7693
  • Overview
  • Features
  • Specifications
ART CleanBox II Hum Eliminator

"Hum" in an audio system is often caused by loop effects which act like antennas. These loops can easily pick up a 60 Hz (or higher harmonics) hum transmitted by electrical wiring. Typically, these loops are connected via grounds, more commonly called "ground loops". The safest way to eliminate unwanted noise is with the CleanBOX II. Some examples of Ground Loops:
  • The power ground of a synthesizer, connected to the signal ground of the synth, into a mixer's ground, then into a mixer's power ground.
  • The signal ground of a send effect (reverb, delay) into a mixer, and the connecting power grounds of the mixer and the unit.
  • The power ground of a guitar amplifier, connected to a signal processor which has a second guitar amplifier on the other channel, and then the second guitar amp's power ground.

The CleanBOX II easily removes ground loops without any signal degradation.

  • Cost-effective in-line hum eliminator for use with guitar amps, keyboards and signal processors producing 60Hz ground loop noise
  • Removes ground loops without any signal degradation
  • Safe, passive operation
  • 1/4" TRS input and output connectors read both balanced and unbalanced lines
Specifications
Frequency Response 10Hz – 50kHz, +/- .5dB
@ +4dBu
THD .01% Typical @ 1kHz, +18dBu,
<.05% @ 100Hz, +24 dBu
Insertion Loss .4dB @ 100kOhm Load, 5.5dB
@ 600Ohm Load
Connections 1/4” TRS balanced/unbalanced
jacks
Power Passive
Dimensions 4.5 x 2.875 x 1.5 inches
(114mm x 73mm x 38mm)
Weight .9 lbs (.4kg)
Customer Reviews
(0.00)
# of Ratings: 0
There are no comments for this product.

 

EXCLUSIVES SAVINGS

Join our mailing list to receive special offers and discounts in your inbox

We won't share your address
Copyright © 2016 Front Row Electronics. All Rights Reserved.