YOUR ONLINE AUDIO SUPERSTORE
Click to call! 866-693-7693

Ashly ne1600d 2-Chan Network Amplifier 2 x 800W @ 4Ohms w/ AES3 Inputs

Shipping:
Free Ground Shipping
SKU:Asne1600dMFR #:ne1600d
Product Highlights
  • Ethernet control is standard
  • Low-Z, 25V, 70V and 100V Model
  • Includes AES3 Inputs
  • Easy and intuitive user interface
  • Extensive protection circuitry
  • Level attenuators for each channel
  • Power switch can be disabled by software
  • 4-Step Signal Level and Clip LEDs
  • 10/100 Ethernet port
  • Euroblock inputs and outputs
  • Remote level control
  • Remote power standby
(0.00) View Ratings
Your Price:
$1,880.00
Product is out of stock.
Sign up for Email notification
once this product becomes available:
Questions? Ask our experts:
866-693-7693 866-693-7693
  • Overview
  • Features
  • Specifications

Ashly ne1600c 2-Channel Network Amplifier 2 x 800W @ 4 Ohms w/ CobraNet (2223)

Ashly's two-channel NE amplifiers for the performance installation and constant voltage markets, the ne800, ne1600 and the ne2400 add a new level of power and control from the simplest to most advanced audio system applications. The ne800 provides 400W, ne1600 800W and ne2400 1200W per channel at four ohms. Input connections are XLR-1/4" Neutrik combo connectors and 6-pin Euroblock. XLR male and Euroblock connectors are also provided for looping to additional amplifiers. Output connectors are locking Neutrik Speakon (NL-4) and Euroblock.

Network Enabled (NE) amplifiers offer ease of use, full setup, control and monitoring using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed. NE Series amplifiers are offered two ways; standard and "pe" (Protea Enabled) with our world renowned Protea DSP signal processing.

The DSP library is extensive and utilizes two SHARC 32-bit/96kHz processors. Processing blocks include Graphic, Parametric, Notch and Shelving Equalization, High-, Low- and All-Pass Filters (HPF/LPF/APF) with up to 48dB/Octave slopes, Delay, Compressor/Limiter, Gate, Ducking, Auto-leveler, Gain and Signal Generators (sinewave, white and pink noise). A full Matrix Mixer with assignable routing allows any input to drive any or all amplifier outputs. Presets can be used to store and retrieve global parameters of an entire amplifier's control surface and DSP section.

Additionally, each amplifier also provides DC voltage control of the attenuators which makes it a snap to control volume from remote locations, preset recall, Remote Power Standby and data in and out ports for connecting accessories like the WR-5 to control user selected parameters. There are LED indicators for power, standby, protect, network communications and each channel has a four-step signal meter, bridge mono, temperature and current indicators. AES/EBU, and Cobranet input modules will be available as options.

 

 

  • Ethernet control is standard
  • Low-Z, 25V, 70V and 100V Model
  • Extensive DSP Available
  • Easy and intuitive user interface
  • Extensive protection circuitry
  • Safety/Compliance: (cTUVus/FCC, CE pending), RoHS
  • Level attenuators for each channel
  • Power switch can be disabled by software
  • 4-Step Signal Level and Clip LEDs
  • 10/100 Ethernet port
  • Euroblock inputs and outputs
  • Remote level control
  • Remote power standby
 
Specifications
Power Rating 450W/Channel @ 8?



800W/Channel @ 4?



1600W @ 8? Bridged
Damping Factor > 250
Input Sensitivity 26 or 32dB, or 1.4V (Switch-Selectable)
Input Impedance 20 kOhms, Balanced
Gain Variable
Frequency Response 20Hz - 20kHz ±1dB
Signal-to-Noise Ratio > 105dB
Total Harmonic Distortion (THD) < 0.5%
Connectors 2 x XLR Inputs



2 x Euroblock Inputs



2 x XLR Aux Outputs



1 x Euroblock Aux Output



2 x Speakon Outputs



1 x Euroblock Speaker Output



1 x 10/100 Ethernet Port



1 x Remote Euroblock Connector



1 x Input Expansion Slot



1 x AC Power Input
Controls 1 x Power Switch



2 x Level Control Knobs



1 x Mode Selector Switch



1 x High Pass Filter Switch



1 x Sensitivity Selector Switch
Indicators 2 x 4-Segment Level/Clip LED Meters



2 x Temperature LEDs



2 x Current LEDs



1 x Bridge LED



1 x Power LED



1 x Standby LED



1 x Protect LED



1 x Power Switch Disable LED



1 x COM LED
Cooling Variable-Speed Fan, Front-to-Back Airflow
Power Consumption 0.6A, 40W (1/8 Idle)
Dimensions (HxWxD) 3.5 x 19 x 15.5" (89 x 483 x 392mm)
Weight 21 lbs (9.5kg)
Customer Reviews
(0.00)
# of Ratings: 0
There are no comments for this product.

 

EXCLUSIVES SAVINGS

Join our mailing list to receive special offers and discounts in your inbox

We won't share your address
Copyright © 2016 Front Row Electronics. All Rights Reserved.