YOUR ONLINE AUDIO SUPERSTORE
Click to call! 866-693-7693

Ashly nX1.52 Two-Channel 1.5KW Programmable Output Power Amplifier

Ashly nX1.52 Two-Channel 1.5KW Programmable Output Power Amplifier
Shipping:
Free Ground Shipping
SKU:AsnX1.52MFR #:nX1.52
Product Highlights
  • Programmable output on each channel
  • Hi-Z or Lo-Z, selected via rear panel DIP switches
  • Power-saving, Energy Management System
  • Front panel power switch and level controls
  • Front panel LEDs
  • Neutrik Combo XLR - 1/4" TRS jack 
  • Euroblock input connectors
  • Rear panel DIP switches per channel
  • Remote DC level control on each input channel
  • Extensive protection circuitry
  • Multiple independent internal power supplies
(0.00) View Ratings
Your Price:
$1,950.00
Questions? Ask our experts:
866-693-7693 866-693-7693
  • Overview
  • Features
  • Specifications

Ashly nX1.52 Two-Channel 1.5KW Programmable Output Power Amplifier

The Ashly NX1.52 Programmable Output Power Amplifier features lightweight, energy efficient Class D switching amplifier technology combined with a switch mode power supply. The NX1.52 amplifier is designed to meet the needs of demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces, and convention centers.

The NX1.52 is a base level amplifier with 2 channels. Use rear panel DIP switches to program each channel output for either High-Z (70V or 100V Constant Voltage) or Low-Z (stable down to 2 Ohms) operation. When in Sleep Mode, the NX1.52 amplifier draws less than 1W.
  • 2-channel high-output, lightweight amplifier with programmable output on each channel (Hi-Z or Lo-Z, selected via rear panel DIP switches)
  • Power-saving, Energy Management System
  • Front panel power switch and level controls (can be disabled for security)
  • Front panel LEDs for temperature, current, signal, clip, mute, bridge mode, protect, sleep, and disable (of front panel controls)
  • Neutrik Combo XLR - 1/4" TRS jack plus Euroblock input connectors
  • Neutrik speakON twist locking loudspeaker connectors for security, safety, and reliability
  • Rear panel DIP switches per channel for selection of high pass filter, limiter, input gain, and High-Z or Low-Z speaker output configuration
  • Remote DC level control on each input channel
  • Neutrik powerCON detachable AC mains connector
  • Switch mode power supply automatically detects 120 or 240VAC operation
  • Extensive protection circuitry, continuously variable cooling fans
  • Multiple independent internal power supplies provide increased channel separation and reliability
Specifications
Number of Channels 2
2 Ohms 1,500 W
4 Ohms 1,500 W
8 Ohms 1,250 W
4 Ohms (br) 3,000 W
8 Ohms (br) 3,000 W
Power Draw Sleep Mode: < 1 W
Standby Mode: 40 W
Idle (no signal): 55 W
Current 120 VAC Mains (Divide by 2 for 240 V)
Sleep Mode: 0.1 A
Standby Mode: 0.70 A
Idle (no signal): 1.00 A

All Channels Driven (Divide by 2 for 240 VAC)
Typical: 8.0 A

Dissipation Thermal (All Channels Driven)
Sleep Mode: 3.4 BTU/hr
Standby Mode: 136 BTU/hr
Idle (no signal): 187 BTU/hr
Typical (1/8 maximum power): 850 BTU/hr
Voltage Gain
 Selectable at 26 dB, 32 dB, 38 dB, or 1.4 V
Damping Factor
>250 (8 Ohm load <1 kHz)
High-Pass Filter Input: 80 Hz 2nd order
Distortion SMPTE (typical): <0.5%
THD-N (typical): <0.5% (8 Ohm, 10 dB below rated power,20 Hz to 20 kHz)
Channel Separation -75 dB (dB from full output, 1 kHz)
Signal to Noise Ratio 20 Hz to 20 kHz (unweighted): >111 dB
Frequency Response 20 Hz to 20 kHz, +/-0.05 dB
Input Connector Balanced: Euroblock 3.5 mm, 1/4" TRS and XLR Combo jack
Input Impedance 10 kOhm
Maximum Input Level +21 dBu
Output Connector Speaker: Neutrik speakON
Connection Data: Euroblock 3.5 mm - Gnd, 18 V, In, Out
Level Control Remote DC: Euroblock 3.5 mm - Gnd, CV, V+ per input
Attenuation Per Channel: Front panel, software, offset link group, and remote. Fully off = Mute
Protection Amplifier: Inrush current limitation, temperature monitoring, output over-power protection, mains fuses
Cooling Continuously variable temperature controlled axial fan(s)
Environmental 32 to 113°F (0 to 45°C) non condensing
Dimensions (W x H x D) 19.0 x 3.5 x 16.8" (482.6 x 88.9 x 426.7 mm)
Weight < 28.0 lb (12.7 kg)
Customer Reviews
(0.00)
# of Ratings: 0
(Only registered customers can rate)
There are no comments for this product.

 

EXCLUSIVES SAVINGS

Join our mailing list to receive special offers and discounts in your inbox

We won't share your address
Copyright © 2016 Front Row Electronics. All Rights Reserved.