Key Features

• Four-channel mixer provides two mic/line input channels (1 and 2) that accept XLR and ¼" TRS connections; they feature ultra-low noise preamps, two-stage clip lights, trim controls and XLR line-out channels. Secondary input channels (3 and 4) accept ¼" unbalanced line-level sources.
• Proprietary ToneMatch® presets on channels 1 and 2 optimize L1 system to match intended natural sound of specific instruments and microphones on channels 1 and 2.
• Cylindrical Radiator® loudspeaker uses 24 small drivers mounted into a slim, vertical enclosure to create nearly 180 degrees of horizontal coverage with little dropoff in volume and tone. Loudspeaker's two-piece, interlocking design makes for quick and easy setup, breakdown and transport.
• Integrated power amplifiers in power stand deliver clean, precise amplification for L1 Model I loudspeaker and up to two B1 bass modules.
• Channel inserts/effects loops for connecting external effects and processors to channels 1 and 2 via ¼" TRS line input/output jack. Use a stereo plug to connect the send and return signals with one cord.
• Bass module out for amplified bass output signal to one or two B1 bass modules. L1 system automatically adjusts equalization appropriately when bass modules are connected.
• Bass line out delivers post-DSP bass signal output. Accepts ¼" TRS phone cable. Use to connect powered subwoofer, additional amplification system or Bose® PackLite® amplifier with up to two additional bass modules.
• Digital data out sends digital mix of channels 1 and 2 to external recording gear at 48KHz sample rate.
• R1 remote input for included remote control and 16' cable.

Remote

• Tone controls provide -12 dB cut to +12 dB boost of high, mid and low frequencies on channels 1 and 2.
• Level controls and signal/overload LEDs show green/red signal status to help you set proper gain levels.
• Master level to adjust volume of all four input channels simultaneously.