|
|
Home > Accessories > Shure CBL-M+-K-EFS Music Phone Adapter Cable for iPhone, iPod iPad
Shure CBL-M+-K-EFS Music Phone Adapter Cable for iPhone, iPod iPad
|
|
Your Price: $49.95
Part Number: ShCBL-M+-K
Manufacturer Part No:CBL-M+-K
|
- Overview
- Using the Remote
|
|
Shure CBL-M-+K Music Phone Cable with
Remote + Mic for iPone, iPod and iPad. Integrated three-button
remote and mic allows you to adjust the volume, control music
and video playback, record voice memos, and answer or end calls
Made for
- iPod touch (2nd and 3rd generation)
- iPod nano (4th and 5th generation)
- iPod shuffle (3rd generation)
- iPod classic (120GB, 160GB only)
- iPhone 3GS
- iPhone 4
- iPad
Remote and mic supported only by: iPod nano (4th
and 5th generation), iPod classic (120GB, 160GB only), iPod
touch (2nd and 3rd generation), iPhone 3GS, iPhone 4, and iPad.
The remote is supported by iPod shuffle (3rd generation). Audio
is supported by all iPod models. Requires latest iPod software.
UPC: 04240617898
|
| In 2010, Shure
introduced new SE series earphones. A key feature on each model
is a replaceable cable that has sub-miniature MMCX connectors:
a female connector on each earphone and two male connectors
on cable.
The model CBL-M+-K is a 56 inch (142 cm) replacement
cable that includes a three-button remote switch and a microphone.
The earphones then serve a dual purpose: to listen to music
or to listen to the person on the other end of the call. The
microphone is used to speak to the other person during a call.
NOTE: the CBL-M+-K is specifically for Apple
products designed to work with the Apple Remote + Mic. As of
December 2010, this includes the iPod Touch 4G, iPod Touch 2G;
iPod Nano 5G; iPhone 3Gs; iPod 120 gB Classic; Macbook Air 2009,
and some later Macbook Pro units.
The CBL-M+-K mic/switch module contains a proprietary
integrated circuit chip that communicates with a complementary
integrated circuit chip inside of the Apple product. The communication
signals between the chips travel on the same wire as the microphone
audio. The interaction of these two chips can provide these
functions: send call; end call; volume up; volume down; pause
music track; fast forward; and rewind.
NOTE: If the CBL-M+-K is connected to a device
that does not have the complementary integrated circuit chip,
the switch functions will not operate.
The 3.5mm male plug is configured as follows:
Tip - audio feed to left earphone;
Ring 1 - audio feed to right earphone;
Ring 2 - ground return for earphones and for microphone;
Sleeve - audio feed from microphone.
|
 |
The operating voltage range for the
microphone is 1.5Vdc to 3.6Vdc. The current draw is 0.25 mA
maximum. The impedance is 300 ohms. The output level is -52dBV
at 1kHz, 94 dB SPL.
The diameter of the CBL-M+-K cable, measured at 5 inches below
the earphone, is 0.060 inch. At the 3.5mm plug, the cable diameter
is 0.090 inch. The cable on the CBL-M+-K is slightly more flexible
than the SE earphone cable.
At the 3.5 mm phone plug, the round, plastic "shoulder"
(that secures the metal portion of the plug) has a diameter
of 0.29" - 19/64".
In September 2011, Shure introduced the model CBL-M+-K-EFS.
The only difference is the external packaging. The cable and
its function did not change.
[CBL = Cable; M+ = for use with specific Apple products; K
= black cable; EFS = English - Spanish - French instructions]
|
|
Product Reviews
| 
|
|