|
|
Home
Tripp Lite MRV2012UL Inverter Charger 2000 Watts
|
|
Your Price: $664.95
Part Number: TLMRV2012UL
Manufacturer Part No:MRV2012UL
|
- Overview
- Features
- Specifications
| Tripp Lite's MRV2012UL Inverter/Charger
is the quiet alternative to gas generators -- with
no fumes, fuel or noise to deal with! It provides equipment
with utility- or generator-supplied AC electricity filtered
through premium ISOBAR surge protection. This heavy-duty DC-to-AC
inverter with automatic line-to-battery transfer and integrated
charging system serves as an extended-run UPS, a standalone
power source or an automotive inverter suitable for rugged RV
applications. Supplies up to 2000 watts of continuous 120V AC
power from any 12V DC battery or automotive DC source. OverPower
inverter output feature temporarily provides up to 150% of the
continuous output for up to 60 minutes and DoubleBoost inverter
output feature delivers up to 200% of the continuous output
for up to 10 seconds, providing the extra power needed to cold-start
heavy-duty power tools and motorized equipment. When hardwire
AC input is energized, commercial power passes through to connected
equipment and the battery set is recharged via 3-stage charging
system with user-selectable 25/100 amp charger output. In UPS
mode, the MRV APS system responds to blackouts and voltage fluctuations
with a near-instantaneous automatic transfer to battery-derived
AC output. Includes a set of high-current DC input terminal
posts for simple installation (user supplies batteries and cabling
- see owner's manual for recommendations). Passes sine wave
utility or generator power during battery charging and UPS line
power operation, plus efficient PWM sine wave AC output in inverter
and UPS backup modes. Reliable large transformer design with
frequency control powers resistive electronic loads or large
inductive motors, compressors and other items with high current
needs on startup. Optional APSRM4 wired remote control module
with full status LEDs provides remote power inverter on/off
switching and continuous status information (APSRM4 sold separately).
Supports an unlimited amount of runtime with any number of user-supplied
batteries connected. Highly adaptable to a variety of applications
and site conditions with adjustable charger settings for wet/gel
battery types and selectable line to battery power transfer
voltages.
UPC 037332139153
|
|
Key Features
- MRV2012UL serves as an automotive or stationary DC-to-AC
inverter with automatic line-to-battery transfer and integrated
battery charger
- Supports 120V AC output from a 120V AC line power source
or 12V DC battery source
- 16.6 millisecond automatic transfer between line and battery
power supports UPS protection during blackouts and voltage
fluctuations for equipment compatible with a one cycle transfer
time
- 2000 watts continuous AC output in inverter mode, 3600
watts continuous AC output in AC line power mode
- DoubleBoost inverter output supports momentary startup
loads up to 200% of the continuous rating for up to 10 seconds
- OverPower inverter output supports longer duration overloads
to 150% for up to 60 minutes under ideal battery and temperature
conditions. (For best results, utilize OverPower usage for
as short of a duration as possible, ensure battery bank and
cabling is able to provide full nominal DC voltage under load
and allow inverter/charger to fully cool before and after
OverPower usage.)
- 3-stage battery charger with user-selectable 25/100 amp
operation and adjustable settings for wet/gel battery types
with charger on/off capability; offers fast, reliable battery
recharging
- Protected hardwire DC terminal posts safely accept heavy-gauge
input wiring from attached battery bank
- Protected hardwire output passes 120V line power or inverter
output through to connected equipment
- Extremely reliable large-transformer design tested to UL
(USA & Canada) standards
- Moisture-resistant construction enables vehicular operation
in high-humidity environments
- 3-position operating mode switch supports "AUTO"
mode to enable automatic transfer between DC and AC modes,
CHARGE-ONLY to maintain a full battery charge when AC is present
without auto transfer and SYSTEM OFF settings
- Six front panel LEDs display AC/DC operational modes, overload
status, DC voltage level, shutdown status and system fault
status
- 4 configuration dip-switches support wet/gel battery charging
profiles, charger enable/disable capability, selectable 75/85/95/105V
AC low voltage auto transfer points during brownout conditions
- 4 additional configuration dip-switches support 4 levels
of charger limiting relative to output load size, a battery
equalization program and battery charger low/high settings
- Resettable 25A charger AC input breaker and variable-speed
cooling fan protect the inverter from load- and temperature-related
failures
- Grounding lug properly connects the inverter/charger system
to earth ground or vehicle grounding system
- Automatic overload and thermal shutoff safely turns off
inverter as excessive loads or overheating conditions develop
- Front panel connector enables remote off/on switching (requires
optional APSRM4 remote control module, sold separately)
- Load-sensing control dial enables adjustable load threshold
required to automatically turn the inverter on and off in
DC mode as load conditions change
- Includes battery temperature sensor with 20 foot cable
to prolong battery life by adjusting the charge level based
on battery temperature
- Automatic Generator Starter jack enables user configuration
of automatic generator startup as inverter batteries drop
to 11.5V DC and generator shutoff as inverter batteries are
recharged to 14.1V DC
Applications
- Versatile inverter/charger system with automatic transfer
switching serves as a vehicular inverter for RVs, over-the-road
trucking, conversion vans and fleet service vehicles. Also
serves as a standalone alternative power source for off-grid,
alternative energy or export applications and as an uninterruptible
power supply (UPS) for equipment compatible with a 16.6 millisecond
transfer time.
Package Includes
- MRV2012UL Inverter/Charger
- Instruction manual with warranty information
- Battery Temperature Sensor cable
- Conduit hanger
|
| OVERVIEW |
| Intended
Application |
RV/Fleet/Alternative Power |
| SYSTEM
OVERVIEW |
| Voltage compatibility |
12V DC / 120V AC |
| OUTPUT |
| Frequency
compatibility |
60 Hz |
| Output watts |
2000 |
| Continuous
output capacity (watts) |
2000 |
| Peak output
capacity (watts) |
4000 |
| Output nominal
voltage |
120V |
| Output voltage
regulation |
LINE POWER (AC): Maintains 120V nominal
sine wave output from line power source. INVERTER POWER
(AC): Maintains PWM sine wave output voltage of 120 V
AC (+/-5%). |
| Output frequency
regulation |
60 Hz (+/- 0.3 Hz) |
| Overload protection |
Includes 25A input breaker dedicated
to the charging system |
| Outlet quantity
/ type |
Hardwire |
| INPUT |
| Recommended
Electrical Service |
DC INPUT: Requires 12V
DC input source capable of delivering 190A for the required
duration (when used at full continuous capacity - DC requirements
increase during Over-Power and Double-Boost operation).
For automotive applications, professional hardwire |
| Maximum input
amps / watts |
DC INPUT: Full continuous load - 190A
at 12V DC. AC INPUT: 38 amps at 120V AC with full inverter
and charger load (20A max charger-only / combined input
load to support charger and AC output is automatically
controllable to 66%-33%-0% based on AC output l |
| Input connection
type |
DC INPUT: Set of 2 DC bolt-down terminals.
AC INPUT: hardwire |
| Input cord
length (ft.) |
DC INPUT: User supplies cabling. 0 gauge
or larger (see manual). AC INPUT: hardwire |
| BATTERY |
| Expandable
battery runtime |
Runtime is expandable with any number
of user supplied wet, gel type batteries |
| DC system
voltage |
12V |
| Battery Pack
Accessory (optional) |
98-121 sealed lead acid battery (optional) |
| Battery recharge
rate |
25A / 100A (selectable) |
| LEDS
ALARMS & SWITCHES |
| Switches |
3 position on/off/remote switch enables
simple on/off power control plus "auto/remote" setting
that enables distant on/off control of the inverter system
when used in conjunction with optional APSRM4 accessory
when used in inverter mode. In AC uninterrupt |
| Front panel
LEDs |
Set of 6 LEDs offer continuous status
information on load percentage (6 levels reported) and
battery charge level (7 levels reported). See manual for
sequences. |
| PHYSICAL |
| Shipping weight
(lbs) |
46.6 |
| Shipping weight
(kg) |
21 |
| Cooling method |
Multi-speed fan |
| Unit Dimensions
(HWD/in) |
8 x 10.5 x 17.5 |
| Unit Dimensions
(HWD/cm) |
20.32 x 26.67 x 44.45 |
| Shipping Dimensions
(HWD/in) |
13 x 15 x 21.5 |
| Shipping Dimensions
(HWD/cm) |
34.29 x 38.1 x 54.61 |
| Unit weight
(lbs) |
43.2 |
| Unit weight
(kg) |
19.4 |
| Material of
construction |
Polycarbonate |
| Style |
Heavy-duty with built-in battery charger |
| Form factors
supported |
Mounting slots enable permanent placement
of inverter on any horizontal surface (see manual for
additional mounting information) |
| ENVIRONMENTAL |
| Relative Humidity |
0-95% non-condensing |
| LINE
/ BATTERY TRANSFER |
| Transfer time
from line power to battery mode |
16.6 milliseconds (typical - compatible
with many computers, servers and networking equipment
- verify transfer time compatibility of loads for UPS
applications) |
| Low voltage
transfer to battery power |
In AC "auto" mode, inverter/charger switches
to battery mode as line voltage drops to 75V (user adjustable
to 85, 95, 105V - see manual) |
| High voltage
transfer to battery power |
In AC "auto" mode, inverter/charger
switches to battery mode as line voltage increases to
145V |
| SPECIAL
FEATURES |
| Appearance |
Attractive gray color scheme |
| Load Sensing |
Optional load sense function enables
automatic inverter shutoff and startup as connected equipment
is powered off and on. Front panel load sense potentiometer
can be set to shutoff or turn on inverter power in response
to loads of any level, up to 150 watts. |
| Remote control
capability |
Yes |
| CERTIFICATIONS |
| Certifications |
Tested to UL458 (USA) and CSA (Canada) |
| WARRANTY |
| Standard warranty
period |
30 months (Outside the U.S. and Canada,
call for warranty information) |
*Specifications may change without
notice
† Tripp Lite uses primary and third-party agencies to
test its products for compliance with standards.
|
|
Product Reviews
| 
|
|