|
|
Home
Tripp Lite RV3012OEM Inverter Charger 3000 Watts
|
|
Your Price: $1,299.00
Part Number: TLRV3012OEM
Manufacturer Part No:RV3012OEM
|
- Overview
- Features
- Specifications
| Tripp Lite's RV3012OEM Inverter/Charger is the
quiet alternative to gas generators?with no fumes, fuel or noise
to deal with! It provides equipment with utility- or generator-supplied
AC electricity filtered through premium ISOBAR surge protection.
This DC-to-AC inverter with automatic line-to-battery transer
and integrated charging system serves as an extended run UPS,
a standalone power source or an automative inverter suitable
for rugged RV applications. Supplies up to 3000 watts of continuous
120V AC power from any 12V DC battery or automotive DC source.
OverPower TM inverter output feature temporarily provides up
to 150% of the continuous output for 1-60 minutes and DoubleBoost
TM inverter output feature delivers up to 200% of the continuous
output for up to 10 seconds, providing the extra power needed
to cold start heavy-duty tools and motorized equipment. When
hardwire AC input is energized, commercial power passes through
to connected equipment and the battery set is recharged via
3 stage, selectable 35/140 amp charging system. Includes optional
dual-circuit hardwire AC input to enable full charger output
from circuit 1 with a 120V 20A input and full AC pass-through
from circuit 2 with a second 120V 20A input feed. In UPS mode,
the APS system responds to blackouts and voltage fluctuations
with a near instantaneous automatic transfer to battery-derived
AC output. Includes a set of high current DC input terminals
for simple installation (user supplies batteries and cabling
- see owner's manual for recommendations). Passes sine wave
utilty or generator power during battery charging and UPS line
power operation, plus efficient PWM sine wave AC output in inverter
and UPS backup modes. Reliable large transformer design, with
frequency control powers resistive electronic loads or large
inductive motors, compressors and other items with high current
needs on startup. Optional APSRM4 wired remote power switch
with full status LEDs provides remote power inverter on/off
switching and continuous status information (APSRM4 sold separately).
Supports an unlimited amount of runtime with any number of user-supplied
batteries connected. Highly adaptable to a variety of applications
and site conditions with adjustable charger settings for wet/gel
battery types and selectable line to battery power transfer
voltages.
UPC 037332117427
|
|
Key Features
- RV3012OEM serves as an automotive or stationary DC-to-AC
inverter with automatic line-to-battery transfer and integrated
battery charger
- Supports 120V AC output from a 120V AC line power source
or 12V DC battery source
- 16.6 millisecond automatic transfer between line and battery
power supports UPS protection during blackouts and voltage
fluctuations for equipment compatible with a one cycle transfer
time
- 3000 watts continuous AC output in inverter mode, 4800
watts continuous via dual circuit AC output in AC mode
- Double Boost inverter output supports momentary startup
loads up to 200% of the continuous rating for up to 10 seconds
- OverPower inverter output supports longer duration overloads
to 150% for 1-60 minutes under ideal battery and temperature
conditions. (For best results, utilize OverPower usage for
as short of a duration as possible, ensure battery bank and
cabling is able to provide full nominal DC voltage under load
and allow inverter/charger to fully cool before and after
OverPower usage.)
- 3 stage, selectable 35/140 amp battery charger with adjustable
settings for wet/gel battery types offers fast, reliable battery
recharging
- Protected hardwire bolt-down input lugs safely accept heavy
gauge input wiring from attached battery bank
- Protected hardwire output passes 120V line power or inverter
output through to connected equipment. Includes optional dual-circuit
hardwire AC input to enable full charger output from the first
120V 20A circuit and full AC pass-through from the second
120V 20A input feed
- Reliability enhanced large-transformer design tested to
UL (USA) and CSA (Canada) standards
- Moisture-resistant construction enables vehicular or marine
operation in high humidity environments
- 3 position operating mode switch supports "AUTO"
mode to enable automatic transfer between DC and AC modes,
CHARGE-ONLY to maintain a full battery charge when AC is present
without auto transfer and SYSTEM OFF settings
- Set of six front panel LEDs display AC/DC operational modes,
overload status, DC voltage level, shutdown status and system
fault status
- Set of 4 configuration dipswitches support wet/gel battery
charging profiles, adjustable 135/145V high voltage auto transfer
during overvoltages and selectable 75/85/95/105V AC low voltage
auto transfer during brownouts
- Set of 4 additional configuration dipswitches support 4
levels of charger limiting relative to output load size, a
battery equalization program and battery charger low/high
settings
- Resettable 30A charger AC input breaker and resettable
dual 20A branch-rated AC output breakers and automatic 2 speed
cooling fan protect the inverter from load and temperature
related failures
- Grounding lug properly connects the inverter/charger system
to earth ground or vehicle grounding system
- Automatic overload and thermal shutoff safely turns off
inverter as excessive loads or overheating conditions develop
- Front panel remote control connector enables remote off/on
switching (requires APSRM4 switch accessory). Optional APSRM4
accessory also includes user configurable jacks to support
inverter shutoff or startup as a vehicle ignition is engaged
- Load sensing control dial enables adjustable load threshold
required to automatically turn the inverter on and off in
DC mode as load conditions change
- Includes battery temperature sensor with 20 foot cable
to prolong battery life by adjusting the charge level based
on battery temperature
- Automatic Generator Starter jack enables user configuration
of automatic generator startup as inverter batteries drop
to 11.5VDC and generator shutoff as inverter batteries are
recharged to 14.1VDC
Typical Applications
- Versatile inverter/charger system with auto-transfer switching
serves as an automotive inverter for RVs, over-the-road trucking,
conversion vans and fleet service vehicles; a standalone alternative
power source for off-grid, alternative energy or export applications
and as an uninterruptible power supply (UPS) for items compatible
with a 16.6 millisecond transfer time
Package Includes
- RV3012OEM Inverter/Charger
- Instruction manual with warranty information
|
|
*Specifications may change without notice
|
|
Product Reviews
| 
|
|