|
|
Home
Tripp Lite APSX750 PowerVerter Inverter / Charger 750 Watts - 230V
|
|
Your Price: $295.00
Part Number: TLAPSX750
Manufacturer Part No:APSX750
|
- Overview
- Features
- Specifications
Tripp Lite's APSX750 DC-to-AC
inverter with automatic line-to-battery transfer and
integrated charging system serves as an extended run UPS, a
standalone power source or an automotive inverter. Supplies
up to 750 watts of continuous 230V AC power to 2 AC outlets
from any 12V battery or automotive DC source. OverPower inverter
output feature temporarily provides up to 150% of the continuous
output for 1-60 minutes and DoubleBoost inverter output feature
delivers up to 200% of the continuous output for up to 10 seconds,
providing the extra power needed to cold start heavy-duty tools
and motorized equipment. When AC cable is connected to a live
wall socket, commercial power passes through to connected equipment
and the battery set is recharged via 3-stage, selectable 5/20
amp charging system. In UPS mode, the APS system responds to
blackouts and voltage fluctuations with a near instantaneous
automatic transfer to battery-derived AC output. Includes a
set of high current DC input terminals for simple installation
(user supplies batteries and cabling - see owner's manual for
recommendations). Passes sine wave utility or generator power
during battery charging and UPS line power operation, plus efficient
PWM sine wave AC output in inverter and UPS backup modes. Reliable
large transformer design, with frequency control powers resistive
electronic loads or large inductive motors, compressors and
other items with high current needs on startup. Optional APSRM4
wired remote power switch with full status LEDs provides remote
power inverter on/off switching and continuous status information
(APSRM4 sold separate). Supports an unlimited amount of runtime
with any number of user-supplied batteries connected. Highly
adaptable to a variety of applications and site conditions with
adjustable charger settings for wet/gel battery types and selectable
line to battery power transfer voltages.
|
Key Features
- Supports 230V AC output from a 230V AC line power source
or 12V DC battery source
- 10 millisecond automatic transfer between line and battery
power supports UPS protection during blackouts and voltage
fluctuations for equipment compatible with a 1/2 cycle transfer
time
- 750W continuous AC output in inverter mode
- Double Boost™ inverter output supports momentary startup
loads up to 200% of the continuous rating for up to 10 seconds
(see specification chart)
- OverPower™ inverter output supports longer duration
overloads to 150% for 1-60 minutes under ideal battery and
temperature conditions
- 3 stage, selectable 5/20 amp battery charger with adjustable
settings for wet/gel battery types
- Dual C13 output receptacles pass 120V line power or inverter
output through to connected equipment
- 3 position operating mode switch supports "AUTO"
mode to enable automatic transfer between DC and AC modes,
CHARGE-ONLY to maintain a full battery charge when AC is present
without auto transfer and SYSTEM OFF settings
- Set of 6 front panel LEDs display continuous status
- Set of 4 dip switches support wet/gel battery charging profiles,
charger enable/inhibit, and selectable 144/163/182/201V AC
low voltage auto transfer during brownouts
- Set of 4 additional dip switches support 4 levels of charger
limiting relative to output load size, a battery equalization
program and battery charger low/high settings
- Resettable 3A charger AC input breaker and resettable 4A
AC output breaker and automatic 2 speed cooling fan protect
the inverter from load and temperature related failures
- Automatic overload and thermal (overheating) shutoff
- Front panel remote control connector enables remote off/on
switching (requires APSRM4 switch accessory)
Typical Applications
- Versatile inverter/charger system with auto-transfer switching
serves as an automotive inverter for RVs, over-the-road trucking,
conversion vans, high humidity environments and fleet service
vehicles; a standalone alternative power source for off-grid,
alternative energy or export applications and as an uninterruptible
power supply (UPS) for items compatible with a 10 millisecond
transfer time. NOTE: For sump pump applications, Tripp Lite
recommends its "UT" Utility Truck Inverter/Chargers.
Package Includes
- APSX750 Inverter/Charger
- Instruction manual with warranty information
|
| OVERVIEW |
| Intended
Application |
Emergency Home Power |
| OUTPUT |
| Frequency compatibility |
50 Hz |
| Output watts |
750 |
| Continuous output
capacity (watts) |
750 |
| Peak output capacity
(watts) |
1500 |
| Output nominal voltage |
230V |
| Output voltage regulation |
LINE POWER (AC): Maintains 230V nominal
sine wave output from line power source. INVERTER
POWER (AC): Maintains PWM sine wave output voltage
of 230 VAC (+/-5%). |
| Output frequency
regulation |
50 Hz (+/- 0.3 Hz) |
| Overload protection |
Includes 3A input breaker dedicated
to the charging system and 4A output breaker for AC
output loads. |
| Outlet quantity
/ type |
2 AC outlets |
| INPUT |
| Recommended Electrical
Service |
DC INPUT: Requires 12VDC input source capable of delivering
72A for the required duration (when used at full continuous
capacity - DC requirements increase during OverPower
and DoubleBoost operation). For automotive applications,
professional hardwire installation with 100A minimum
battery system fusing is recommended. AC INPUT: 230VAC |
| Maximum input amps
/ watts |
DC INPUT: Full continuous load - 72A at 12VDC. AC
INPUT: 6.2A at 230VAC with full inverter and charger
load (2.2A max charger-only / combined input load
to support charger and AC output is automatically
controllable to 66%-33%-0% based on AC output loading
using the charger limiting set points - see manual
for setting instructions) |
| Input connection
type |
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT:
IEC-320 C14 inlet connection |
| Voltage compatibility (VAC) |
230 |
| Voltage compatibility (VDC) |
12 |
| BATTERY |
| Expandable battery
runtime |
Runtime is expandable with any number
of user supplied wet or gel type batteries |
| DC system voltage |
12 |
| Battery Pack Accessory
(optional) |
98-121 sealed lead acid battery (optional) |
| Battery recharge
rate |
Selectable 5 / 20 amp with 1/2 cycle (10 ms) transfer
time |
| LEDS
ALARMS & SWITCHES |
| Switches |
3 position on/off/remote switch enables
simple on/off power control plus "auto/remote" setting
that enables distant on/off control of the inverter
system when used in conjunction with optional External
switch for wired remote control of APS unit (APSRM4)
accessory when used in inverter mode. In AC uninterruptible
power mode, "auto/remote" setting enables automatic
transfer from line power to battery power - to maintain
continuous AC power to connected loads. |
| Front panel LEDs |
Set of 6 LEDs offer continuous status
information on load percentage (6 levels reported)
and battery charge level (7 levels reported). See
manual for sequences. |
| SURGE/NOISE
SUPPRESSION |
| AC suppression joule
rating |
840 |
| PHYSICAL |
| Shipping weight
(lbs) |
20 |
| Shipping weight
(kg) |
9.1 |
| Cooling method |
Multi-speed fan |
| Unit Dimensions
(HWD/in) |
7 x 8.75 x 9 |
| Unit Dimensions
(HWD/cm) |
17.78 x 22.23 x 22.86 |
| Shipping Dimensions
(HWD/in) |
12.5 x 11 x 10.75 |
| Shipping Dimensions
(HWD/cm) |
31.75 x 27.94 x 27.31 |
| Unit weight (lbs) |
18.6 |
| Unit weight (kg) |
8.3 |
| Material of construction |
Polycarbonate |
| Style |
Heavy-duty with built-in battery
charger |
| Form factors supported |
Mounting slots enable permanent placement of APSX750
on any horizontal surface (see manual for additional
mounting information) |
| ENVIRONMENTAL |
| Relative Humidity |
0-95% non-condensing |
| LINE
/ BATTERY TRANSFER |
| Transfer time from
line power to battery mode |
10 milliseconds (typical - compatible
with many computers, servers and networking equipment
- verify transfer time compatibility of loads for
UPS applications) |
| Low voltage transfer
to battery power |
In AC "auto" mode, inverter/charger
switches to battery mode as line voltage drops to
144V (user adjustable to 163, 182V - see manual) |
| High voltage transfer
to battery power |
In AC "auto" mode, inverter/charger
switches to battery mode as line voltage increases
to 272 |
| SPECIAL
FEATURES |
| Appearance |
Black Color |
| Remote control capability |
Yes |
| WARRANTY |
| Standard warranty
period |
1 year (Outside the U.S. and Canada,
call for warranty information) |
| † Tripp
Lite uses primary and third-party agencies to test
its products for compliance with standards. |
*Specifications may change
without notice
|
|
|
Product Reviews
| 
|
|