Audio-Technica AT-VM95E/H Turntable Headshell/Cartridge Combo Kit

SKU: AtAT-VM95E/H

MFR: AT-VM95E/H

Product Highlights
  • Pre-Mounted & Ready to Play
  • AT-VM95E Dual Moving Magnet Cartridge
  • Low Distortion &High Channel Separation
  • Elliptical Stylus
  • Low-Resonance Housing
  • AT-HS6BK Headshell
  • Integral Finger Lift
  • Write a Review
    $79 .00 79
    UPC:
    4961310146528
    Condition:
    New
    Availability:
    Ships within 1 Business Day from New York
    PayPal Credit Buy now. Pay over time. Check out with PayPal and choose PayPal Credit. US customers only. Subject to credit approval. See terms 6 and 12 Month Special Financing Online through Klarna, available at checkout
    Product Highlights
  • Pre-Mounted & Ready to Play
  • AT-VM95E Dual Moving Magnet Cartridge
  • Low Distortion &High Channel Separation
  • Elliptical Stylus
  • Low-Resonance Housing
  • AT-HS6BK Headshell
  • Integral Finger Lift
  • (No reviews yet) Write a Review

    Description

    The Audio Technica Consumer AT-VM95E/H is a kit that pre-mounts the AT-VM95E dual moving magnet cartridge on to the AT-HS6BK headshell.

    AT-VM95E Dual Moving Magnet Cartridge

    The Audio-Technica Consumer AT-VM95E Dual Moving Magnet Cartridge features a special coil design, which delivers a powerful output level (4.0 mV) with high channel separation and low distortion for remarkable tonal quality. The cartridge can be mounted to a standard 1/2" mount and features integrated threaded inserts, allowing it to be mounted with just two screws (no nuts required). All VM95 Series share the same body, allowing the stylus to be replaced with any of the six interchangeable AT-VMN95 replacement styli.

    VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus

    Aluminum cantilever

    Specially wound coils increase output voltage

    Durable low-resonance polymer housing

    Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required

    Compatible with any AT-VMN95 replacement stylus

    AT-HS6 9g Headshell Aluminum Die Cast Body (Black)

    The black Audio-Technica Consumer AT-HS6 is a lightweight (9g) headshell mount. Featuring an aluminum die-cast body, it is designed to keep vibration to the bare minimum. The finger lift is positioned near the front of the headshell to enable precise placement of the stylus onto the record. The headshell is equipped with quad wire terminals and comes with mounting hardware.